|
MAXIMUM MULTICORE - AH106 - CHOOSE A LENGTH FROM THE DROP DOWN MENU ABOVE
MAXIMUM AH Series Multicores, such as the AH106, are well built and designed audio multi core stagebox / snake cables for multi-way signal transmission between stage and mixer. The stagebox has a lightweight aluminium design with robust construction. These multicores should be your 1st choice for value and quality.
All signal ways are balanced with 2 copper cores and aluminium foil screening.
Features
-
Signal ways: 28
-
Inputs: 24
-
Outputs (returns): 4
-
Cable length: 20m/30m/50m multipair cable, 700mm spliced ends
-
Metal XLR Cannon style connectors
-
Aluminium strain relief with cable bending protection
Other information
All multicores are designed to handle line level and mic level type signals. The stage box is sited on stage, and the outputs from instruments and microphones are plugged into the stagebox. These signals then travel down the multicore cable length to a sound mixing board or desk situated off stage. Here the individual signals are mixed and processed, and the master pre-amp output from the mixer is then sent back down the multicore cable to the PA amplifier or powered PA speakers on stage.
This signal should NOT be a fully amplified signal from the output of a power amp or powered mixer amp because multicores are designed to carry pre-amp signals. If a fully amplified signal is sent down the multicore, there will be power and signal quality loss and oscillation signal / sounds will be evident at Higher Volume levels . The longer the multicore, the more the signal loss and degradation. Amplified signals from the output of an amp need proper speaker cables to connect to passive non-powered PA speakers. These PA speaker cables minimise signal loss and power Amplifiers and are connected to the stage Box Sends .
Call our Freindly staff in the PA SECTION so that we can advise you of any other issues you may need to address with your building of a professional PA System. | 
