|
SHURE PSM200 In Ear Personal Monitoring System
-
RF Output Power: 10 - 30 mW (countryspecific)
-
Operating Distance: Up to 100 m
-
Harmonic distortion: 1.5 % typical
-
Signal-to-noise-ratio: 80 dB (A) typical
-
Listening mode: Mono
-
Compatible Systems per band (up to): 4
-
Transmitter Inputs: 2x XLR/6,3 mm combo, mic/line level
-
Transmitter Outputs: 2x XLR split outputs
-
Wired Bodypack Option: Yes
-
Personal Mix Control: On transmitter
-
Remoteable Transmitter: No
-
Battery Life: Wired: 6 h; Wireless: 4 h
-
Frequency Response: 30 Hz - 12 kHz
Further Technical Specifications
-
RF Carrier Range: 518-865 MHz (country dependent)
-
Modulation: FM +/- 35 kHz Deviation (Nominal)
-
Operating Temperature: -7 degrees C to +49 degrees C (+20 degrees F to +120 degrees F)
EP2T TransMixer
-
Modulation Limiter: Internal peak limiter (>10:1 hard knee compression)
-
Antenna: 1/4 Wavelength, semi-rigid, PCB Mount
-
Connector Type: XLR/1/4-inch combo
-
Nominal Input Level: 25 dBu @ 1/2 volume (12 o'clock)
-
Maximum Input Level: 5 dBu @ 1/2 volume (12 o'clock)
-
Current: 170 mA maximum
-
Dimensions: 220 mm x 140 mm x 40 mm (8.6 in. x 5.6 in. x 1.7 in.)
-
Net Weight: 370 g (13 oz.)
P2R Receiver
-
RF Sensitivity: 109 dBm typical
-
Squelch Threshold: 102 dBm typical
-
Antenna: Attached Whip
-
Audio Input Connector: Connector Type: 1/4-inch Mono
-
Impedance: 1 megohm
-
Maximum Input Level: LO = +0 dBu; HI = 10 dBu
-
Frequency Response: 30 Hz to 20 kHz (+/ 3 dB); earphone dependent
-
Power Requirements: 9 V alkaline battery, Duracell® type MN1604 recommended
-
Audio Output Connector: 1/8 inch (3.5 mm)
-
Minimum Load Impedance: 8 ohms
-
Net Weight: 100 g (3.52 oz.), less battery
-
Overall Dimensions: 122 mm x 73 mm x 32 mm (4.809 in. x 2.875 in. x 1.251 in.)
SE-115-CL Sound Isolating Earphones
-
Speaker type: MicroSpeaker II
-
Sensitivity (1 kHz): 105 dB SPL/mW
-
Impedance: 16 Ω
-
Frequency range: 22 Hz - 17,5 kHz
-
Cable length: 162 cm
-
Weight: 30 g
-
Color: Clear
|